Damp walls can be a continual headache, ruining the interior décor and exposing the home to mold and decay. There are different reasons for walls to be wet. And the first thing you need to do when solving the problem is to locate the cause. If it is not immediately obvious, you will need expert advice to track it down. Here are some of the main types of damp wall causes.

Rising Damp: Rising damp is the most common cause of seepage. Water finds its way up and through a wall through osmosis, usually because of damp soil adjacent to the wall. Rising damp can sometimes be fixed by resealing the walls. Eliminating the source of the intruding water is also recommended. Estimates of damp proofing cost in Richmond can be arranged through an Internet search.

Leaks: Leaks can be more noticeable and much more destructive. Leaks in walls are usually caused by water going where it shouldn’t and then finding a way through a wall. The first thing to do is track down the water source and stop it from getting to your wall. Then the crack or hole should be sealed with the appropriate material.

Condensation: condensation is caused when there are temperature differences between a surface and the air. Cold surfaces draw moisture from the air, and it shows up as condensation. The best fix is insulation.

If you are having the same damp wall problems repeatedly, it would be best to contact an expert and have the problem analysed. Wet walls are a nuisance, and solving the problem forever is going to be worth the expense.